Finish Work
rwilson 0
My only shop goal for fall of 2020 was to get the window and door trim installed. I decided on vinyl
Month: February 2021
Recent Post
Broken Heater
rwilson 0
While the HVAC technicians praised my overdone heater install they suggested that they would have gon
100 Amp Electrical Upgrade
rwilson 0
Up to this point I was still using the 40 amp feed that originally went to the old 2 car garage. To m
Finally!!!
rwilson 0
Despite plans to put the second 2 post lift up when I bought it in 2017 and spending the better part
Workbench and shop computer
rwilson 0
If you look back through posts you will may notice my workbench. I originally built it out of scrap m
Attic Insulation
rwilson 0
I had great luck working with the places Cleary recommended over what I had found myself at the old h
The Ceiling: Finale
rwilson 0
The shop held 40 degrees all winter and the gas bill wasn’t nearly as bad as I thought it would
Trailer Parking
rwilson 0
My car trailer was able to sit in the shop with a car on it for the better part of two years. With th
The Ceiling: Intermission
rwilson 0
My 2018 goal was to get the shop done….at least enough to be able to work on cars over the wint
We have heat!!!
rwilson 1
With the heater up it was time to get the power and thermostat wiring done. This involved bending con
